Insulation of buildings
-
Since it was founded in 1996, Flexirub has developed its historical business by offering a wide range of films, geotextiles, foams and other accessories for the protection and insulation of buildings.
Flexirub protects and insulates your constructions
- TECHNICAL FILMS
- UNDER-PAVING FILMS
- PROTECTIVE FILMS
- BASEMENT PROTECTIONS
- ACOUSTIC INSULTING FOAMS
- GEOTEXTILES FOR EXTERNAL WORK
- MULCHING FOR PLANTS
Anti-Termite Films
Exterior Work Geotextiles
Under-Paving Films
Basement Protections
Anti-Root Barriers
Plasterboard Protective Covers
-
Flexirub offers a wide range of films, geotextiles, foams and other accessories for the protection and insulation of constructions.
- Anti-Termite Films
- Anti-Radon Film
- Under-Paving film - Three-layer Coexdalle 150 µm
- Under-Paving film - Three-layer Coexdalle 160 µm
- Under-Paving film - Three-layer Coexdalle 200 µm
- Under-Paving Film 150 µm real
- Under-Paving Film 200 µm real
- Under-Paving Film 300 µm real
- Type 150 Protective Films
- Type 200 Protective Films
- Type 300 Protective Films
- Basement Protection
- Superior Acoustic Foam
- Geotextile for exterior work - 100 g/m²
- Anti-root barrier
- Standard green mulching mat
- Green mulching mat 130 g/m²
-
Anti-Termite Films
The Isofilma anti-termite film is a patented physical and chemical barrier to meet the requirements of the Directive dated 27/06/2006 from the CTBA. The Cultisol anti-termite film is made up of a 150 µm highly resistant low density polyethylene film which cannot be crossed and is non-pollutant. Incorporated into it are active ingredients (BIFENTHRINE termicide).
Dimensions : 5 m x 33 m.ADVANTAGES
- Suitable for the dimensions of detached houses.
- Environmentally friendly: as it cannot leach out it actively prevents diffusion into the soil, surface water and water tables.
- This product is CTB-P+ certified by the FCBA.
- Film guaranteed for 10 years.
-
Anti-Radon Film
The Isofilma anti-radon film is a complex of different plastic materials giving it remarkable properties in terms of permeability to air. It blocks radon in the soil and prevents it penetrating the dwelling. The Cultisol anti-radon film is easy to put in place. It is both light and supple and has very high resistance.
Dimensions : 6 m x 25 m.ADVANTAGES
- Prevents radon penetrating the dwelling via the ground.
- 100 times more waterproof than a standard 200 µm polyethylene film
- Prevents rising damp
- Film produced in an ISO 9001 certified factory
Did you know ?
Radon is a naturally occurring radioactive gas. It is the result of the disintegration of uranium and radium present in the earth's crust. It is present everywhere on the surface of the planet and comes mainly from granite and volcanic subsoils and certain materials of construction. The annual number of lung cancer deaths attributable to residential radon exposure in France varies about 1 200-2 900 based on exposure-response relationships and is the second leading cause of lung cancer after tobacco. -
Under-Paving film - Three-layer Coexdalle 150 µm
The three-layer Coexdalle 150 µm is a polyethylene and copolymer film. As a result of its three-layer technology, it has very good mechanical resistance. It is also rotproof and impermeable to water. This black under-paving film is suitable for the surfaces of a dwelling. It is installed before pouring the concrete screed.
Dimensions : 6 m x 25 m (150 m²) ou 4 m x 10 m (40 m²).ADVANTAGES
- Film adapted to under-paving standards (ITBTP No.482)
- Resistance to puncture and rising damp
- Compliant with the EC standard, NF EN 13967
- Compliant with DTU 13.3 Part 3 for detached houses and DTU 26.2 for hydraulic binder-based screeds.
- Compliant with DTU 31.2 for buildings with wooden frames and DTU 41.2 for the protection of joinery structures and structures protected from bad weather.
-
Under-Paving film - Three-layer Coexdalle 160 µm
The three-layer Coexdalle 160 µm is a polyethylene and copolymer film. As a result of its three-layer technology, it has very good mechanical resistance. It is also rotproof and impermeable to water. This black under-paving film is suitable for the surfaces of a dwelling. It is installed before pouring the concrete screed.
Dimensions : 6 m x 25 m (150 m²).ADVANTAGES
- Film adapted to under-paving standards (ITBTP No.482)
- Resistance to puncture and rising damp
- Compliant with the EC standard, NF EN 13967
- Compliant with DTU 13.3 Part 3 for detached houses and DTU 26.2 for hydraulic binder-based screeds.
- Compliant with DTU 31.2 for buildings with wooden frames and DTU 41.2 for the protection of joinery structures and structures protected from bad weather.
-
Under-Paving film - Three-layer Coexdalle 200 µm
The three-layer Coexdalle 200 µm is a polyethylene and copolymer film. As a result of its three-layer technology, it has very good mechanical resistance. It is also rotproof and impermeable to water. This black under-paving film is suitable for the surfaces of a dwelling. It is installed before pouring the concrete screed.
Dimensions : 6 m x 25 m (150 m²).ADVANTAGES
- Film adapted to under-paving standards (ITBTP No.482)
- Very high performance film
- Resistance to punching and rising damp
- Compliant with the EC standard, NF EN 13967
- Compliant with DTU 13.3 Part 3 for detached houses and DTU 26.2 for hydraulic binder-based screeds.
- Compliant with DTU 31.2 for buildings with wooden frames and DTU 41.2 for the protection of joinery structures and structures protected from bad weather.
-
Under-Paving Film 150 µm real
The 150 µm under-paving film is a rotproof translucent film suitable for the surfaces of a dwelling. It is installed before pouring the concrete screed.
Dimensions : 3 m x 66 m (198 m²) ou 6 m x 33 m (198 m²).ADVANTAGES
- Film adapted to under-paving standards (ITBTP No.482)
- Resistance to puncture and rising damp
-
Under-Paving Film 200 µm real
The 200 µm under-paving film is a rotproof translucent film suitable for the surfaces of a dwelling. It is installed before pouring the concrete screed. Film deemed necessary by the manufacturers of parquet flooring.
Dimensions : 3 m x 50 m (150 m²) ou 6 m x 20 m (120 m²).ADVANTAGES
- Film adapted to under-paving standards (ITBTP No.482)
- Resistance to puncture and rising damp
- Ideal for protecting parquet flooring from rising damp.
-
Under-Paving Film 300 µm real
The 300 µm under-paving film is a rotproof translucent film suitable for the surfaces of a dwelling. It is installed before pouring the concrete screed.
Dimensions : 6 m x 20 m (120 m²).ADVANTAGES
- Very high performance film
- Film adapted to under-paving standards (ITBTP No.482)
- Resistance to puncture and rising damp
-
Type 150 Protective Films
Standard film suitable for all protective work. Usable in blisters in rolls.
Caution: film not suitable for under-paving
Dimensions : 3 m x 25 m (75 m²) / 3 m x 55 m (165 m²) / 3 m x 115 m (345 m²) / 6 m x 27,5 m (165 m²) / 6 m x 57,5 m (345 m²).ADVANTAGES
- Standard film
- Easy to install and transport
- Several sizes to meet all needs
-
Type 200 Protective Films
Type 200 film suitable for all protective works. Usable in blisters in rolls.
Caution: film not suitable for under-paving
Dimensions : 6 m x 20 m (120 m²) ou 6 m x 41 m (246 m²).ADVANTAGES
- Protective film perfectly suited to the professional
- Easy to install and transport
- Several sizes to meet all needs
-
Type 300 Protective Films
Type 300 film suitable for all protective works. Usable in blisters in rolls.
Caution: film not suitable for under-paving
Dimensions : 6 m x 27 m (162 m²).ADVANTAGES
- Protective film perfectly suited to the professional
- Easy to install and transport
-
Basement Protection
Basement protection makes it possible to protect the waterproofing of the walls and foundations. It also allows optimum drainage towards the base of the foundations and thus prevents any risk of damp and mould. The Isofilma basement protection is manufactured with a high density polyethylene base and a weight of 500 g/m².
Dimensions : 0,50 x 20 m / 1 m x 20 m / 1,5 m x 20 m / 2 m x 20 m / 2,5 m x 20 m / 3 m x 20 m.ADVANTAGES
- Stops damp and moulds
- Prevents any infiltration in the sub-soil
- Resistance to chemicals
- Contributes to thermal insulation
- Up to 3 m in height to protect the foundations of buildings, cellars, etc.
-
Superior Acoustic Foam
This superior acoustic foam is made up of expanded closed cross-linked cell polyethylene foam. With a thickness of 3 mm, it allows the acoustic and thermal insulation of sprung, bonded and nailed parquet flooring, concrete floors, walls or roofs. The Isofilma superior acoustic foam is compatible with underfloor heating.
Dimensions : 1 m x 20 m ou 1 m x 100 m.AVANTAGES
- Double protection: acoustic and thermal
- Use on multiple supports
- Mould-proof
- Resists alkaline aggressions from concrete
- Stability over time
- Compliant with the standards, EN ISO 140/6 and EN 717/2
- Compliant with DTU 51.11 (parquet floors and floor coverings bonded to wood veneer), DTU 51.2 (bonded parquet floors) and DTU 51.3 (wooden floors or wood-based panels)
-
Geotextile for exterior work - 100 g/m²
This 100 g/m² geotextile may be used for all types of exterior work: reinforcement of the structure of buildings, soil stabilisation, protection of pipework, etc. The geotextile for exterior work is made in non-woven polypropylene with anti-UV treatment. In addition to its stabiliser role, it prevents the growth of weeds.
Dimensions : 0,50 m x 0,50 m / 1 m x 20 m / 1 m x 50 m / 1 m x 100 m / 2 m x 25 m / 2 m x 100 m / 4 m x 50 m.ADVANTAGES
- Easy to use
- Numerous sizes to meet all needs
-
Anti-root barrier
The anti-root barrier makes it possible to protect sensitive areas by diverting roots downwards. The Isofilma anti-root barrier is made up of a non-woven geotextile in 100% polypropylene fibres and coated on its two faces with polypropylene. This combination makes it possible to obtain a barrier that is extremely resistant to and impenetrable by roots, while guaranteeing healthy development of trees and plantations.
Dimensions : 0,70 x 25 m / 1,40 m x 25 mADVANTAGES
- UV-resistant as a result of a specific treatment
- Permeability to water and air
- Resistance to tearing and trampling
- Possibility of perforation for putting plants in place
- Use inside greenhouses or in the open air
-
Standard green mulching mat
Standard mulching mat (100 g/m²) prevents the growth of weeds and facilitates plant growth. It is composed of a polypropylene mat with anti-UV treatment. By reducing the use of herbicides and other pesticides, this mat protects the environment and improves your operating costs.
Dimensions : 1,05 m x 100 m / 1,60 m x 100 m / 2,10 m x 100 m / 3,20 m x 100 m / 5,25 m x 100 mAVANTAGES
- UV-resistant as a result of a specific treatment
- Permeability to water and air
- Resistance to tearing and trampling
- Possibility of perforation for putting plants in place
- Use inside greenhouses or in the open air
-
Green mulching mat 130 g/m²
The 130 g/m² mulching mat prevents the growth of weeds and facilitates plant growth. It is composed of a polypropylene mat with anti-UV treatment. By reducing the use of herbicides and other pesticides, this mat protects the environment and improves your operating costs.
Dimensions : ,05 m x 100 m / 1,60 m x 100 m / 2,10 m x 100 m / 3,20 m x 100 m / 5,25 m x 100 mADVANTAGES
- Very high resistance to tearing and trampling
- UV-resistant as a result of a specific treatment
- Permeability to water and air
- Possibility of perforation for putting plants in place
- Use inside greenhouses or in the open air
-
Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.
-
PROTECTIVE GEOTEXTILE
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration. -
DRAINAGE LINER
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.
It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered. -
ROOFING VAPOR BARRIER
This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings.. -
EPDM CORNER GUARDS
EPDM membrane corner guards made-to-measure by hot vulcanization.
Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness. -
ALUMINIUM RAINWATER DRAIN
The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot. -
ADJUSTABLE ALUMINIUM LEAF GUARD
This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters. -
GALVANIZED STEEL GRAVEL GUARD
This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes. -
EPDM RAINWATER DRAIN
The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure -
SHAPED ALUMINIUM FLASHING
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes. -
ALUMINIUM DRIP EDGE FLASHING
Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
The drip edge flashing is used to ensure a perfect finish to sealing upstands.
It is secured using screws or hammer fixings every 30 cm in the predrilled -
FASTENING PROFILE
The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5) -
EPDM MASTIC
Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)
Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDM
-
DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports- Used in addition to glues and sealants
- Ideal for securing a flexible EPDM collar or for fixing a sealing gauge
-
GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
• Solvent-free and odorless glue
• Gluing by simple gluing
• Allows repositioning of the membrane
Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton
-
ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.
Fiche De Données Sécurité Colle Membrane EPDM Tout Support -
EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.
Fiche De Données Sécurité Colle Membrane EPDM Sur EPDM
-
INSTALLATION TOOL KIT
Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun. -
REPAIR KIT
Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane -
SINGLE-USE LIFTING LOOP
Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
Dimensions:
- Maximum working load of 500 kg: 30 mm x 5 m
- Maximum working load of 1000 kg: 60 mm x 5 m
- Maximum working load of 1500 kg: 90 mm x 5 m -
ANTI-ROOT BARRIER
The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m
ADVANTAGES
- Exceptionally long-lasting (25 years)
- Impact resistant
- Light and easy to use
- Resistant to bacteria and chemicals
- Specific anti-UV treatment
- No risk to the environment - product is fully recyclable
-
WATERPROOF FLANGE COLLAR
The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint. -
PLINTH FOAM
The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
Dimensions : 100 mm x 50 m.
ADVANTAGES
- Avoids sound bridges and tile cracks
- Heatable floor heating
- Respects the expansion of the parquet
- Two thicknesses available for different performance levels
-
PROTECTIVE COVER FOR CEMENT
Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.
ADVANTAGE
Allows cement storage outside -
PROTECTIVE COVER FOR GYPSUM BOARD
Translucent cover to protect drywall against moisture.
Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.
ADVANTAGE
Allows storage of plasterboard outside -
SOFT CONICAL COLLAR EPDM
The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization -
ANCHOR ACCESSORIES
Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.
Features:- Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
- Nickel-plated brass eyelets: Øint 40 mm
- "Half-moon" or "triangle" rings: Ø 6 mm x 50 mm
-
ALUMINUM ROOF OUTLET
The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot. -
DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
Allows to connect the widths of vapor barrier film to each other
• Facilitates the fixation of the film on the support
Format: 60mmx20m -
PVC FEMALE CAP
Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints. -
PVC OVERFLOW WITH 90° BEND
The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints. -
PVC DRAINAGE VALVE
PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand. -
PVC THROUGH WALL CONNECTION
Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
• Consists of a threaded spindle, two nuts and two EPDM flat seals -
METAL FASTENING CLIPS
Permit secure attachment of ground protection geotextile -
METAL RINGS
Stainless steel for excellent resistance to corrosion and aging
• Made by hot forging for superior mechanical strength
Format: Triangle and Half Moon -
GEOKIT® Drained and undrained tertre
This GeoKit® contains the following components:- 1 separation geogrid
- 1 separation geotextile 150 g / m²
- 1 LDPE film 0.4 mm (in the case of the drained mound)
- 1 watertight flange collar (in the case of the drained mound)
- 1 adhesive collar (in the case of the drained mound)
-
PVC GEOMEMBRANE 1MM
Complies with NF DTU 64.1
• Allows waterproofing of drained sand filters -
LDPE FILM 400 µm
This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness. -
SEPARATION GEOGRID
The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.
The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems. -
GEOPLUS® SPREADING
Allows separation of gravel and topsoil in trenches -
THREE-LAYER COEXDALLE
• Prevents moisture rise by capillarities
• Complies with DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards
Three-layer polyethylene three-layer underpadding film
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards -
UNDER-PAVING FILM
Film under translucent plowing, single-layer polyethylene
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards
Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m -
PROTECTIVE FILM
Protective film made of polyethylene
• Suitable for all types of work
• Easy to install -
ANTI-TERMITE FILM
Three layer film with a thickness of 150 μm in polyethylene
• Created a physicochemical barrier against termites
• Non-washable film which prevents any diffusion of active material
• Product certified CTB-P + by the FCBA
• Guaranteed 10 years
Format : 5 m x 33 m -
ANTI-TERMITE FILM FACE ADHESIVE
Format : 75 mm x 66 m -
ANTI-RADON FILM DOUBLE-FACE ADHESIVE
Format : 19 mm x 20 m -
CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
Format : 50 mm x 25 m -
MULCHING MAT
Woven polypropylene green mulch fabric
• UV-treated product
• Fastening by staple
• Permeable to water and air -
GEOTEXTILE FOR EXTERIOR WORK
Geotextile in nonwoven needlepunched polypropylene 100 g / m²
• Stabilizes the floors before laying a pavement or a terrace
• Allows protection of drainage pipes -
ANTI-RADON FILM
Film with a thickness of 200 μm in polyamide
• Created a genuine barrier to radon gas in construction
• Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film -
SUPERIOR ACOUSTIC FOAM
Polyethylene foam with reticulated closed cells
• Allows acoustic and thermal insulation
• Compatible with underfloor heating -
FINISHING PROFILE
Profile for fixing the underbody protection to the wall -
MOUNTING KNOBS WITH NAILS AND WASHERS
Nails and washers for fixing the profile to the underbody protection -
BASEMENT PROTECTION
Polyethylene underbody protection
Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m
-
-
In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents:
Flexirub documentation:
insulation of buildings
Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete our information request form.
REQUEST YOUR ESTIMATE
